Tube Tri-Proof Lamp, Make Your World Brighter!

tubu tisha // New


April 12  

Do you still often worry about the dim lighting environment? Fear of humidity, dust, corrosion and other environmental damage to your lamps and lanterns? With the development of science and technology, LED lighting technology is changing day by day, the birth of LED tri-proof lights, will completely subvert the drawbacks of traditional lamps and lanterns, leading the lighting industry to a new chapter!

LED tri-proof lamps can not only provide bright and efficient light. More importantly, it has a waterproof, dustproof, explosion-proof triple protection function,and can be applied to a variety of harsh environments. Wet bathrooms, dusty workshops, and even food processing plants that require high-pressure cleaning, LED tri-proof tubes can safely and reliably light up for you!

LED Lamp Three-proof Grade

Three-proof lamp, as the name suggests, is a waterproof, dustproof, explosion-proof function of the lamp. Its protection level by the International Electrotechnical Commission (IEC) to develop, with "IP" plus two numbers, said. IP67 and IP69K are two common three-proof lamp protection level.

IP Protection Class

IP67 is waterproof and dustproof. Lamps can be immersed in water up to 1 meter deep for 30 minutes without water entering the interior. Dust is completely prevented from entering the interior of the lamp.IP69K is waterproof and dustproof. Rinse the lamp with 80℃ hot water for 10 minutes under 80-100bar (8-10MPa) pressure, and no water will enter inside. Completely prevents dust from entering the interior of the lamp.IP69K has a higher level of protection than IP67, and is able to withstand higher intensity water pressure and water temperature, which makes it suitable for more severe environments, such as high-pressure cleaning environments, food processing factories, chemical factories, etc. High temperature and humid environment, sauna, bathroom, etc. Corrosive environments such as seashore, saline and alkaline land.

IK Protection Class

IK10 means that the lamps can withstand an impact energy of 10 joules, which is equivalent to a 5kg object falling from a height of 20cm impacting the lamps. IK08 means that the lamps can withstand an impact energy of 5 joules, which is equivalent to a 2.5kg object falling from a height of 40cm impacting the lamps.

Structure and material of a three-proof lamp

Tri-Proof Lamp Structure

The structure mainly consists of lampshade, lamp body, light source, driving power supply, seals several parts. The lampshade is usually made of PC or PMMA, which has good light transmission and impact resistance. Lamp body is usually made of aluminum alloy or plastic, with good heat dissipation and corrosion resistance. The light source usually adopts LED lamp beads, with high luminous efficiency, long life and other characteristics. The driving power supply converts AC power into DC power required for the LED lamp beads to work. The seal is located between the lampshade and the lamp body, playing the role of waterproof and dustproof.

Tri-Proof Lamp Material

PC (polycarbonate) has good light transmission, impact resistance, high temperature resistance and corrosion resistance, commonly used in the production of lampshade. PMMA (polymethyl methacrylate) has good light transmission, easy to process, weather resistance and chemical resistance, commonly used in the production of lampshade. Aluminum alloy has good heat dissipation and corrosion resistance, commonly used in the production of lamp body. Plastic has good light weight and corrosion resistance, commonly used in the production of lamp body.

China Ip65 LED Tri Proof Light Factory Recommended Products

LED Tubular Tri-Proof Light IP69K


IP67 IP69K, waterproof, dustproof, corrosion-proof, pressure-proof, and vibration proof.

High CRI >80, High Output LEDs, up to 140lm/W, 170lm/W optional.

High Transmittance PC / PMMA cover, no shadow.

PC IK10 / PMMA IK08 impact design.

Flicker-Free isolated driver, High PF>0.96 low THD 12% driver.

Environmentally friendly, no mercury, no UV, no IR.

Through wiring 3×1.5mm² and 5×2.5mm² available.

Energy Efficiency Grade: B, Quick Start instant 100% luminous flux.

5 Year Warranty on complete fixture. (LEDs, Driver, & Housing)

Certificate: CE, ENEC, CB, SAA, cETL, D-Mark, DLG (Ammonia-resistance), 850°C glow wire testing.

Optional: 0-10V / DALI / Sensor / Emergency Battery Backup Options.

Installation: Hanging Mount & Surface Mount

Click the link to learn more about LED light products[]

best solution provider for led tri-proof light

Learn about intelligent solutions for LED Tri-Proof Lamp

When there is a car or someone is active in the garage, the sensor light is fully illuminated, with sufficient illumination at the site; when there is no car and no one is there, the sensor light is in a slightly illuminated state, which is sufficient to meet the minimum brightness required to maintain security and monitoring at the site. You can also choose to close according to the actual situation.

The concept of "on-demand lighting" is truly realized, and the effect of power saving is greatly maximized. After the lamps are triggered to full brightness, there is a time delay, in the case of frequent entry and exit of people and vehicles, the lamps show continuous full-brightness illumination, avoiding the discomfort caused by frequent changes in illumination to the human eye.

Solution 1.

Column Antenna Sensor: MC090D/MC076S/MC077V RC

Integrated microwave sensor & light sensor, automatic switching/dimming.

Pillar antenna with φ8 opening size, suitable for more lamps.

Sensing parameters can be combined by DIP code.

Supports two flexible mounting methods: top & bottom

MC076S,MC077V RC share the same mounting holes and can be used in the same fixture.

CE,SAA,RED,UL certified,5 years warranty.

Suitable for three-proof lamps, line lamps

Solution 2

Flat Antenna Sensor: MC605V-D /MC612V D RC /MC613V D RC

Operating voltage 120-277V/347V

Sensing parameters can be adjusted by DIP SWITCH and remote control.

With MINI splitter head, suitable for more fixture installations.

Ambient threshold function can be used as a learning function for light sensing.

DIM+,DIM- can be used to change the initial brightness of the fixture at will.

Users can set up 4 kinds of quick settings (Scene).

0-10v port can be connected to Myriad MS01 to realize constant light function.

Solution 3

Sensor & Power: MLC20C-P2/MLC40C-P4/MLC40C-P5/MLC65C-P4

Integrate microwave sensing & power supply, easy to install, simple wiring.

Sensing parameters can be adjusted by DIP SWITCH.

With MINI split head, suitable for more fixtures installation.

On/off/two/three dimmers can be selected according to different settings.

Dial code in body & dial code in split two types

20w/40w/65w series, multiple current level selection.

Contact China IP65 LED Tri-Proof Light Manufacturer to get customized Tri-Proof Light solution!

About the Author

Tubu Tisha is a tri-proof light expert with more than 15 years of industry experience. tubu tisha is an engineer with a master's degree in electrical engineering. Tubu Tisha has worked for several well-known lighting companies in product development, engineering and testing positions.

tisha is one of the leading experts in the tri-proof lighting industry. Tubu Tisha has published many papers on tri-proof lamp technology and holds a number of tri-proof lamp patents. Tubu Tisha also frequently speaks at industry conferences to share expertise.

tubu tisha